We have finished a new version of Accelev - v2, adding special BatteryCare mode, with full or non-full charging with avoiding max voltage range (good for battery health). This one is 6 or 8 kW dual-phase-to-single-phase converter. Also, single phase version will be soon available.
Accelev v2 EVSE is a processor-controlled, advanced AC wall box with features not available in other chargers. Beside of grid monitoring (power shedding) and BatteryCare™ unique charging modes it gives an opportunity to equally load 2 phases at 3-phase 400V source to give more power to the car with single phase on-board charger, and thus – to charge much faster.
It is updatable and expandable via USB port and can be flexibly completed according to customer wishes (both cables are detachable/replaceable).
Standard features
Grid monitoring (immediate load reduction while grid overload detected – no more fuse switches keeping turning off)
BatteryCare™ - unique full charging / no full charging modes with maximum life protection for your battery
Updateable via micro USB extension port
Portable (some restrictions apply, see “Precautions & Installation”)
Detachable cables (both – input and output side). Use one charger in all situations.
2.8 inch TFT human interface with „geek mode” - you can monitor all parameters while loading
Overload and over-temperature protection and advanced safety solutions implemented
Manual is here: https://evtun.com/chargers.html?file=files/download/Accelev 6kW_8kW_dual_phase_manual_04_2019.pdf
Accelev v2 EVSE is a processor-controlled, advanced AC wall box with features not available in other chargers. Beside of grid monitoring (power shedding) and BatteryCare™ unique charging modes it gives an opportunity to equally load 2 phases at 3-phase 400V source to give more power to the car with single phase on-board charger, and thus – to charge much faster.
It is updatable and expandable via USB port and can be flexibly completed according to customer wishes (both cables are detachable/replaceable).
Standard features
Grid monitoring (immediate load reduction while grid overload detected – no more fuse switches keeping turning off)
BatteryCare™ - unique full charging / no full charging modes with maximum life protection for your battery
Updateable via micro USB extension port
Portable (some restrictions apply, see “Precautions & Installation”)
Detachable cables (both – input and output side). Use one charger in all situations.
2.8 inch TFT human interface with „geek mode” - you can monitor all parameters while loading
Overload and over-temperature protection and advanced safety solutions implemented
Manual is here: https://evtun.com/chargers.html?file=files/download/Accelev 6kW_8kW_dual_phase_manual_04_2019.pdf
