Range finally back up

[Locuturus]

It gives SOH1 and SOH2. Some think SOH1 is the traction battery, and SOH2 the 12V battery. Mine shows, respectively, 110% (which would be nice, but is unlikely after 7 years service) and 60%, which is quite believable for a 4.5 year old lead/acid battery.

interesting - mine has 110% for both, and the 12v battery hasn't been changed before.... so i'm even less inclined to believe it.

though yesterday it was fully charged, in heated garage (12C), got 126km range, and then went out into -18C and good while driving, just dips when you're stopped. It's like Bjorn says: Always Be Charging (or Cheating LOL)

 

[CanadianLurker]

It gives SOH1 and SOH2. Some think SOH1 is the traction battery, and SOH2 the 12V battery. Mine shows, respectively, 110% (which would be nice, but is unlikely after 7 years service) and 60%, which is quite believable for a 4.5 year old lead/acid battery.

I'm a new Car Scanner user but I cannot find "SOH1", "SOH2", "SOH", or "Sate of Health" anywhere. I do see tons of other battery data, just not what I'm after which is the current SOH.

I’ve connected using the profile for “Kia Soul EV 30 kWh (OBDII + EV)” which seemed most applicable to my 2018. I'm on iOS and am using the latest Car Scanner App version 1.114.11

Maybe SOH simply isn't available for the 30 kwh battery pack? Anybody know if it's available or not and where to find it in the app if it is available? Any other ideas?

 

[Grant Bell01]

The screen shot below shows SoH1 and SoH2 on the Dashboard. This is the position of these two parameters when the app is first installed. Looks like you have changed the layout. You can restore the Dashboard if you saved it before doing any changes by going to Settings -> Dashboard -> Restore dashboard at the bottom of the page. If you have made changes you will have to do it manally. Read the information on the Dashboard. Notice on my screenshot there are no random values. This happened after I updated my app to pro. I have emailed [email protected] to report this issue. I also asked them what is SoH1 and SoH2 are actually measuring. We know one is quite likely the HV Battery. What is the other?

 

[Grant Bell01]

I should have metioned I am using an Android device. So the default layout if you are using an Apple device could be different.

 

[KaZe Zoli]

A 19. oldaltól kezdve a kezdőképernyő #1 . Nekem ilyen

 

[Grant Bell01]

It appears that Car Scanner displays are different for Android and Apple devices from what I see on the Apple Store.